HCA

Headed Concrete Anchor

HEADED CONCRETE ANCHORS are designed for welding to flat surfaces or welding to the fillet or on the heel of angles. All orders for studs include the required ferrules for your application. All COX INDUSTRIES headed anchors meet AWS, ISO and CSA W59 specifications. Test reports available on request.

FERRULES: All orders for studs include required ferrules for welding. Please specify when ordering what type of ferrule is required for your application.

LENGTH: Length is before weld. Stud diameters 1/2” and under will be approximately 1/8” shorter after weld and stud diameters of 5/8” will be approximately 3/16” shorter after weld.

MATERIAL: Low carbon steel, ASTM A29/A108, 1010-1020. Headed Concrete Anchors are also available in weldable stainless steel, with type 302 being the most common.

FLUX: COX INDUSTRIES Headed Anchor Studs are solid fluxed.

: MADE TO ORDER LENGTHS AVAILABLE UPON REQUEST.

Request A Quote product spec sheet

Mechanical Properties Requirements

	Type A	Type B
Tensile Strength	61,000 psi min.	65,000 psi min.
Tensile Strength	420 MPa min.	450 MPa min.
Yield Strength	49,000 psi min.	51,000 psi min.
Yield Strength	340 MPa min.	350 MPa min.
Elongation (% in 2″)	17% min.	20% min.
Elongation (% in 5x dia)	14% min.	15% min.
Reduction of Area	50% min	50% min

Type A studs shall be general purpose of any type and size used for purposes other than shear transfer in composite beam design and construction.

Type B studs shall be studs that are headed, bent, or of other configuration in 3/8” [10 mm], 1/2” [12 mm], 5/8” [16 mm], 3/4″ [20 mm], 7/8” [22 mm], and 1” [25 mm] diameter that are used as an essential component in composite beam design and concrete anchorage design.

STUD SPECIFICATIONS

D	A	H
1/4″	3/16″	1/2″
3/8″	9/32″	3/4″
1/2″	5/16″	1″
5/8″	5/16″	1-1/4″

FLAT FERRULE SPECIFICATIONS

Part No.	A	D	B	C
14FER	.380″	.455″	.150″	.400″
38FER	.505″	.640″	.150″	.390″
12FER	.650″	.795″	.180″	.445″
58FER	.785″	1.030″	.185″	.525″

1/4" HEADED CONCRETE ANCHOR

	Part	Pieces	Pounds	Pounds
Description	No.	Box	Box	M Pieces
1/4 x 1-1/8	CA141	1500	38	24
1/4 x 2-11/16	CA1421	1000	43	43
1/4 x 3-1/8	CA143	1000	52	50
1/4 x 4-1/8	CA144	700	44	62

3/8" HEADED CONCRETE ANCHOR

	Part	Pieces	Pounds	Pounds
Description	No.	Box	Box	M Pieces
3/8 x 1-3/8	CA3813	800	57	70
3/8 x 1-5/8	CA3815	700	56	79
3/8 x 2-1/8	CA382	600	55	91
3/8 x 2-5/8	CA3825	500	56	112
3/8 x 3-1/8	CA383	450	54	122
3/8 x 4-1/8	CA384	350	53	148
3/8 x 5-1/8	CA385	300	59	195
3/8 x 6-1/8	CA386	250	53	216

1/2" HEADED CONCRETE ANCHOR

	Part	Pieces	Pounds	Pounds
Description	No.	Box	Box	M Pieces
1/2 x 1-1/8	CA1211	500	56	112
1/2 x 1-3/8	CA1213	450	55	123
1/2 x 1-5/8	CA1215	400	53	130
1/2 x 2-1/8	CA122	350	59	168
1/2 x 2-5/8	CA1225	300	60	198
1/2 x 3-1/8	CA123	250	57	225
1/2 x 3-5/8	CA1235	225	56	246
1/2 x 4-1/8	CA124	200	57	280
1/2 x 5-5/16	CA1255	150	53	340
1/2 x 6-1/8	CA126	150	59	393
1/2 x 8-1/8	CA128	100	50	495
1/2 x 10-1/8	CA1210	90	54	596
1/2 x 12-1/8	CA1212	75	54	706

5/8" HEADED CONCRETE ANCHOR

	Part	Pieces	Pounds	Pounds
Description	No.	Box	Box	M Pieces
5/8 x 1-7/16	CA5817	275	58	208
5/8 x 2-11/16	CA5821	175	55	319
5/8 x 3-3/16	CA583	150	55	363
5/8 x 4-3/16	CA584	125	57	444
5/8 x 5-3/16	CA585	100	53	528
5/8 x 6-3/16	CA586	100	61	604
5/8 x 6-9/16	CA5869	85	55	646
5/8 x 8-3/16	CA588	75	59	781
5/8 x 10-3/16	CA5810	50	48	946
5/8 x 12-3/16	CA5812	50	57	1120

All Cox Industries Headed Concrete Anchors meet current
AWS and CSA W59 specifications.

Headed Concrete Anchor

FERRULES

LENGTH

MATERIAL

FLUX